Details
The Wilson 859981 4 -Way signal splitter allows you to split the signal from an amplifier to up 4 internal antennas with negligible signal loss. The splitter is dual band/iDEN, and so will work with all the amplifiers on our site.
This 4-Way splitter allows you to drive three interior antennas from a single amplifier/repeater. Because you are splitting equally the signal each antenna will receive is 1/4 of the original signal. This equates to about 50% of the coverage distance when compared to driving a single antenna. You should use this splitter if the 4 areas you wish to cover are approximately equal in area.
Connections:
The splitter has N Female connectors. Typically a 2ft cable is used to connect the splitter to the amplifier. Any cable length can be used, but the total cable length in the system should be kept to a minimum to minimize attenuation.
Lengths of coaxial cable can then connect the splitter to the internal antennas.
Additional Information
| Weight | 0.7500 |
|---|---|
| Frequency | 800MHz, 1900MHz, Dual Band, iDEN |
| Impedance | 50 ohm |
| Connector Type | N Female |
| Signal Split Ratio | Equal |
| Loss | Both ports -3dB |
| Price | $99.95 |
You may also be interested in the following product(s)
Wilson 4-Way Add-On Antenna KitAs low as: $306.60 |