Details
The Wilson 859957 signal splitter allows you to split the signal from an amplifier to up to 4 internal antennas with negligible signal loss. The splitter covers 700-2300MHz, and so will work with all the amplifiers on our site, as well as any future Wilson repeaters that might be built for new technologies.
This 2-way splitter allows you to drive two interior antennas from a single amplifier/repeater. Because you are splitting equally the signal each antenna will receive is 1/2 of the original signal. This equates to about 70% of the coverage distance when compared to driving a single antenna. You should use this splitter if the areas you wish to cover are approximately equal in area.
Connections:
The splitter has N Female connectors. Typically a 2ft cable is used to connect the splitter to the amplifier. Any cable length can be used, but the total cable length in the system should be kept to a minimum to minimize attenuation.
Lengths of coaxial cable can then connect the splitter to the internal antennas.
Additional Information
| Frequency | 800MHz, 1900MHz, Dual Band, iDEN, 2100MHz |
|---|---|
| Impedance | 50 ohm |
| Connector Type | N Female |
| Signal Split Ratio | Equal |
| Loss | Both ports -3dB |
| UPC Code | Not available |
| Price | $69.95 |
You may also be interested in the following product(s)
Wilson Add-On Antenna KitAs low as: $150.80 |