The Wilson 841292 amplifier is a dual band kit for ambulances and RV's. The kit uses the Wilson 801245 amplifier, which covers all US networks except Nextel, both 3G and voice.This kit is designed by the engineers at Wilson Electronics, and includes components designed to suit ambulances and RV's. If you need to customize your kit with different antennas and cables, then you can do so on this page. Included in this kit are:
- 801245 Wilson SOHO Amplifier
- Wilson 301104 Dual Band NMO (Non-Magnetic Mount) Antenna
- 301135 Indoor Panel Antenna
- Wilson 901102 3/4" NMO Mount with 14' Cable
- 951104 20ft RG58U cable
The kit comes with a spring mounted 14 inch antenna designed to be placed on the roof of the ambulance or RV. Together with the NMO mount it attaches the antenna the roof via a hole in the roof of the vehicle. This provides the permanent, secure mounting necessary for emergency service vehicles.
The 14' of cable from the NMO mount attaches to the SOHO amplifier, which requires a power supply. The standard power supply with the SOHO is a wall socket plug - there are in-car CLA adapter or hardwire options if you require them.
The kit contains 20' of cable, which attaches the amplifier to the indoor panel antenna. The indoor panel antenna transmits the boosted signal. It should be placed at one end of the RV or ambulance, pointing toward the area where you need to increase signal.
If you have any questions on the 841285 Ambulance and RV kit, then please give us a call on (800) 786-6125.
|Max coverage area||2,500 sq ft|
|Gain (up / down)||55dB / 55dB|
|Linear Output Power (up / down)||+30dBm / +30dBm|
|Noise figure||3 dB / 4 dB nominal|
|Power Requirements||120V AC, 3A max|
|Dimensions (inches)||5.6 x 3.6 x 1.7 (amplifier)|
|Frequency detail||824 - 849 MHz / 869 - 894 MHz and 1850 - 1910 MHz / 1930 - 1990 MHz|