Details
Overview:
The Wilson 811201 is a dual band amp that is designed to attach directly to your phone, by using a Wilson cell phone adapter. By attaching the amplifier directly to your phone's antenna port, you can greatly increase the signal improvement.
Kit recommendation:
Outside antenna:
There are many options for the exterior antenna for this kit. The 4" 301113/301114 antennas are small, low profile and suitable if you wish to transport your kit easily. Then there are a variety of 12"/'Tucker' antennas which have the same gain, with a variety of different mounting options. There is also the marine 301130 antenna suitable for boats and yachts. For more information check the relevant antenna product pages.
Adapter cable:
To attach this kit you your phone you will need an adapter cable. We have adapter cables for most phone models - to check which one you need see our adapter cables category and check your phone/data card manufacturer. If your manufacturer is not listed, then you can try the Wilson SignalBoost kits, which have a universal adapter.
Additional Information
| Frequency | Dual Band |
|---|---|
| Max coverage area | Direct Connect |
| Type | Direct Connect |
| Gain (up / down) | 10dB / 14dB |
| Impedance | 50 ohm |
| Linear Output Power (up / down) | +35dBm / +15dBm |
| Noise figure | 3.5 dB nominal |
| Power Requirements | 12V DC, 0.5-1.5A max |
| Dimensions (inches) | 5.5 x 4.3 x 1.4 |
| Frequency detail (up/down) | 824 - 849 MHz / 869 - 894 MHz and 1850 - 1910 MHz / 1930 - 1990 MHz |
| Connector Type | FME Male |
| UPC Code | 813986003817 |
| Instruction Manual | Instruction Manual (PDF) |