The Wilson 801245 amplifier is a dual band amplifier which covers all US networks except Nextel. When purchased as a complete kit it can provide improved signal for your boat or yacht.
The amplifier is sold here as a complete kit, with all the antennas and cables you need to boost signal in your home/office. You can customize the kit by changing the internal antenna and cable lengths to suit your needs. The outside antenna is fiberglass encased with a build-in ground plane. It fits a standard 1 in x 14 threaded mount. If you don't have a threaded mount on your boat then select the marine mount from accessories below. This allows the antenna to attach to any surface via 4 screws.
How it works:
The outside antenna is attached to the outside of your boat. It collects signal and sends it through a cable to the amplifier. The SOHO amplifier boosts the signal, and then sends the boosted signal through a cable to the inside antenna. This provides an area of improved signal, that can be used by up to 15 phones or data cards simultaneously.
The marine antenna is made of a special weatherproof ABS plastic material. It comes with 20ft of cable to run to the amplifier, which you can extend this using one of the extension cables. The antenna mounts to 1" x 14 thread or to any horizontal bar with the included 901104 mount.
You need 2 cable lengths - external antenna to amplifier and amplifier to internal antenna. Use whatever cable lengths you need to make the kit work. Remember that coaxial cable attenuates the signal, so try to use as little as possible.
The amplifier comes with an AC power adapter. If required there is an in-car cigarette charger or hardwire kit for more permanent installations. The 901104 allows the Trucker or Spring Mount antenna to be attached to a horizontal bar (e.g a rear ladder). The 901123 is a casing to allow you to recess the internal panel antenna in to a wall. This makes the antenna flush with the wall.
|Max coverage area||2,500 sq ft|
|Gain (up / down)||50dB / 50dB|
|Linear Output Power (up / down)||+30dBm / +30dBm|
|Noise figure||3 dB / 4 dB nominal|
|Power Requirements||120V AC, 3A max|
|Frequency detail||824 - 849 MHz / 869 - 894 MHz and 1850 - 1910 MHz / 1930 - 1990 MHz|
|Instruction Manual||Instruction Manual (PDF)|